Phone
0493 119 189
Address
Home Base Design &
Build Centre,
Subiaco WA
Opening Soon

Aluminium-clad timber windows combine the natural warmth of timber inside with the weather protection and design flexibility of aluminium outside. But the quality of the finished window depends on more than the materials themselves. How the aluminium is attached, how water is managed and how the different materials accommodate movement all matter.
In GUTMANN’s wood-aluminium systems, aluminium cladding is attached to the timber using dedicated clips, with rear ventilation designed into the construction. This allows the aluminium to expand as temperatures change without being unnecessarily restrained.
Other systems may use different fixing methods, so it is important to understand how each window has been engineered.
The aluminium provides an external protective layer, while the timber frame supports the glazing and hardware and contributes to the window’s thermal performance. Seals, glazing, drainage and installation details work together to determine how the complete window performs.
Understanding these details helps architects, builders and homeowners make more informed decisions when specifying aluminium-clad timber windows.
The market uses “timber-aluminium”, “alu-clad” and “hybrid” for constructions that work in opposite ways. The labels sound alike, but the windows aren’t.
All the windows in this comparison are timber windows with external aluminium. What differs is how the aluminium is attached. Some systems clip it on with a ventilated space behind. Others fix it directly to the timber by bonding, pinning or screwing. From the outside they can look identical; the difference is in how they handle water and movement.
Bonded. The aluminium is stuck to the timber with adhesive or structural tape. The bond line has to stay watertight while two materials that move by different amounts and for different reasons pull against it every day. Its long-term performance depends on the adhesive, surface preparation and how well the bond tolerates UV, heat and moisture over decades.
Pinned or screwed. The aluminium is fixed mechanically into the timber. Each fixing passes through the aluminium into the wood, so each fixing point needs its own seal. It also locks the aluminium in place, so thermal movement has to be accommodated around the fixings.
Screwing isn’t wrong in itself. GUTMANN’s own range includes weather bars designed to be screwed to the timber. Its instructions call for sealant in each hole before screwing, stainless steel screws only, and removal of the excess sealant (GUTMANN catalogue 05.2026). The distinction is between a fixing designed and detailed as part of a tested system, and a shell fixed directly to the timber with no drainage, ventilation or movement allowance behind it.
Why it matters. Directly fixed systems aren’t automatically worse, and a screw or a bond is not a fault in itself. What matters is whether the system gives water a way out and lets the aluminium move. A shell bonded or fixed tight to the timber relies on its joints staying perfect.
A clip-fixed, ventilated system is designed to cope when they don’t: it assumes some water will get past and gives it a way out. On a west-facing Western Australia, especially Perth elevation with large daily temperature swings, that design choice is what separates the two.
In a clip-fixed system, dedicated holders are attached to the timber frame, and the aluminium profiles are secured to those holders.
This arrangement can offer several advantages:
The principle is that the timber carries the holders and the holders carry the aluminium. The aluminium and the timber never touch directly through a fixing.
It is important to distinguish between a system’s main aluminium cladding and its individual accessories. GUTMANN also supplies weather bars designed for direct screw fixing, with installation instructions specifying sealant at the fixing holes. Mechanical fixing is therefore not inherently better or worse in every application. What matters is that the fixing method, sealing and drainage are appropriate for the component.
A well-designed window doesn’t only try to keep water out. It assumes some water will get past the outer face, and gives that water a defined route back outside.
Amber’s ClimaTrend aluminium-clad tilt-and-turn section shows how this works.

Compression sealing, not just contact. Tilt-and-turn hardware draws the sash inward at multiple locking points around the perimeter, compressing the gaskets rather than simply touching them. That helps the seals hold under wind pressure.
The drainage path. In the section, water that passes the outer joint collects in the drainage zone in front of the watertight frame seal. From there it runs down behind the frame cladding and out at the bottom of the frame. It never reaches the room-side seals or the wall construction.
This carries an important consequence. The drainage route runs through the same space behind the cladding that ventilates the timber. Render, sealant or insulation that blocks the bottom of the frame cladding closes off both at once.
Why it matters. Water that enters a window or wall and can’t drain or dry can lead to:
Not all moisture comes from rain. Condensation forms where warm, humid indoor air meets cold surfaces, so a window has to manage both rainwater and condensation.
Uncontrolled moisture can contribute to dampness around frames and finishes, deterioration of moisture-sensitive materials, mould growth and, in more serious cases, costly remediation.


Not every timber window has full aluminium cladding. In conventional timber windows, the lower horizontal part of the sash or frame is particularly exposed to rainwater. A weather bar provides additional protection at this vulnerable location.
GUTMANN manufactures aluminium weather bars designed to protect timber windows and doors from the effects of weather and help direct surface water away from the timber.
Depending on the product, the features can include:
These features are product-specific, so not every weather bar will incorporate all of them.
Weather bars demonstrate an important principle of window design: even a relatively small external component can influence how water is managed around timber.
Aluminium and timber react differently to changes in temperature and moisture. If they are fixed together too rigidly, these differences in movement can create stress within the window system.
Aluminium expands and contracts with temperature
As aluminium heats up, it expands. As it cools, it contracts. According to Hydro’s technical datasheet, aluminium alloy EN AW-6063 has a linear thermal expansion coefficient of approximately 23.5 × 10⁻⁶ per °C at room temperature. (Hydro EN AW-6063 datasheet).
External conditions matter because the temperature of the aluminium can differ significantly from the surrounding air, particularly when the profile is exposed to direct sunlight.

Timber responds mainly to changes in moisture.
Timber absorbs and releases moisture as environmental conditions change. As its moisture content changes, the wood can swell or shrink, with the amount of movement depending on the species, grain direction and moisture conditions.
Materials such as Accoya and engineered laminated timber can help improve dimensional stability and reduce moisture-related movement in high-performance windows. However, some natural movement may still occur as environmental conditions change. This is where the fixing system matters.
A suitably engineered fixing arrangement allows the different materials to respond to environmental changes without creating unnecessary stress at their connection.
GUTMANN describes this principle in its CORA system, where clip fixing allows the aluminium to expand without restraint as temperatures change. Its MIRA system also uses a dedicated aluminium-shell fixing solution.
The precise movement allowances depend on the particular product, profile length, fixing arrangement and other design conditions. These details should be confirmed with the manufacturer for the window being specified.
Whether you are an architect, builder or homeowner, the following questions can help you understand how a proposed system has been designed.
Answers should be supported by documentation for the specific product, rather than general statements about aluminium-clad timber windows as a category.

Aluminium-clad timber windows combine two materials with different characteristics. Their long-term performance depends not only on the quality of the timber and aluminium, but also on how the materials are connected and how the complete system manages water, ventilation, sealing and thermal movement.
Clip fixing, where used, can provide a defined attachment that accommodates movement. Appropriate ventilation and drainage can help manage moisture, while correctly designed seals and installation details contribute to weather resistance.
These features should not be considered in isolation. The quality of the complete window depends on how the components work together and how the system is specified, manufactured and installed.
At Amber Windows, we believe informed specification starts with understanding how a window is engineered, not simply how it looks.
Planning a new home, architectural project or renovation?

Contact Amber Windows to discuss our aluminium-clad timber window and door systems, available configurations and technical information. We can help you explore suitable options for your project’s design, performance and material requirements.